Air floating spindle_Hebei Wanzhuan Tengyuan Bearing Co., Ltd 

Hebei Wanzhuan Tengyuan Bearing Co., Ltd

Rotate to a higherEquity code:668911

Air floating spindle



Air floating spindle (also known as air spindle) refers to a sliding bearing that uses gas (usually air, but may also be other gases) as a lubricant. Air has lower viscosity than oil, is resistant to high temperatures, and is pollution-free. Therefore, it can be used in high-speed machines, instruments, and radioactive devices, but its load capacity is lower than oil.

Main technical parameters
Project 5.5KW air floating spindle 11KW air floating spindle
Rated power 5.5Kw 11Kw
Rated speed 4000rpm 2500rpm
Rated voltage 380V 380V
Rated current 9.8A 18A
Rated frequency 300Hz 200Hz
Number of motor poles: 6 poles, 8 poles
Motor type permanent magnet synchronous permanent magnet synchronous
Maximum speed 4500rpm 3000rpm
Maximum frequency 600Hz 400Hz
Air pressure 5~7KG 5~7KG
Gas source
Air pressure 0.55~0.75MPa 0.55~0.75MPa
Residual dust content ≤ 0.1mg/m ³ ≤ 0.1mg/m ³
Residual oil content ≤ 0.1mg/m ³ ≤ 0.1mg/m ³
Spindle coolant
Pressure 0.2~0.3MPa 0.2~0.3MPa
Flow rate ≥ 2L/min ≥ 2L/min
Temperature ≤ 20-25 ℃ (maximum hourly fluctuation: 2 ℃) ≤ 20-25 ℃ (maximum hourly fluctuation: